Sichuan Yuanfang Machine Equipment Fabricate Co., Ltd.
Main products:Forging And Forging ring,Winder Power Flange,Titanium Alloy,Superalloy Forging,Nonmagnetic Steel Forging
Contact Us
  • Contact Person : Ms. lee teresa
  • Company Name : Sichuan Yuanfang Machine Equipment Fabricate Co., Ltd.
  • Tel : 0086-0816-3362498
  • Fax : 0086-0816-3360946
  • Address : Sichuan,Jiangyou,North Huichang Road, Jiangyou Industry Zone, Jiangyou City, Sichuan Province
  • Country/Region : China

Ni Cr Fe based alloy superalloy

Ni Cr Fe based alloy superalloy
Product Detailed
Ni Cr Fe based superalloy 1)good quality with price and technical advantages 2)service quickly and in time 3)have experiences

Ni Cr Fe based superalloy1)good quality with price and technical advantages2)service quickly and in time3)have experiences

ASTM B603, DIN 17470, JIS C2520, GB/T1234.

Our advantage:High quality,short delivery time,small MOQ.

A superalloy, or high-performance alloy, is an alloy that exhibits excellent mechanical strength and creep resistance at high temperatures, good surface stability, and corrosion and oxidation resistance. Superalloys typically have a matrix with an austenitic face-centered cubic crystal structure. A superalloy's base alloying element is usually nickel, cobalt, or nickel-iron. Inconel, Hastelloy

Usage:Resistance heating elements;Material in metallurgy;Household appliances;Mechanical manufacturing and other industries.

for further information, please do not hestitate to contact us.

800H/HT is an austenitic heat resistant alloy designed for high temperature structural applications. The strength of 800H/HT is achieved by controlled levels of carbon, aluminum and titanium along with a 2100°F minimum anneal to achieve a grain size of ASTM 5 or coarser. 800H/HT is commonly welded using RA82 (ERNiCr-3) bare wire for applications under 1450°F. RA330-04 (N08334) bare wire offers a closer match of thermal expansion coefficient, and somewhat higher strength. For maximum strength alloy 617 (ERNiCrCoMo-1) bare wire or 117 (ENiCrCoMo-1) covered electrodes are suggested. To avoid possible stress relaxation grain boundary cracking of N08811 in applications above 1000°F the welded fabrication may be heated 1650°F for about one hour per inch of thickness or 30 minutes minimum then air cooled.

Common Trade Names

800H, Incoloy 800, Alloy 800


Plate, Sheet, Coil, Welding Products


UNS N08811, UNS N08810, Werkstoff 1.4958, Werkstoff 1.4959, EN 1.4958, EN 1.4959 ASTM: B 407, B 408, B 409 ASME: SB-407, SB-408, SB-409 Code Case 1325

Chemical Composition, % CrNiMnSiAlTiAl +TiCCuPSFe
FeaturesHigh design stresses for ASME Section VIII applications to 1650°FUseful oxidation resistance through 1900°FResistant to chloride ion stress corrosion crackingApplicationsNitric acid catalyst supportsReformer outlet pigtails and manifoldsHeat exchangersPressure vesselsDampersPhysical Properties

Density: 0.287 lb/in3Melting Point: 2475 - 2525°F

Temperature, °F70140016001800
Coefficient* of Thermal Expansion, in/in°F x 10-6-9.910.2-
Thermal ConductivityBtu • ft/ft2 • hr • °F6.713.815.117.8
Modulus of Elasticity, Dynamic psi x 10628.521.119.2-

* 70°F to indicated temperature.

Mechanical Properties

Representative Tensile Properties

Ultimate Tensile Strength, ksi7763.555.732.318.610.2
0.2% Yield Strength, ksi2916.514.814.411.68.9
Elongation, %52515078120120

Typical Creep- Rupture Properties

Temperature, °F140016001800
Minimum Creep 0.0001%/Hour, ksi6.03.61.05
10,000 Hour Rupture Strength, ksi7.33.51.2

Back to Top

Ni Cr Fe based alloy superalloy

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.